Feeder-15-2-250 MIG/MAG

Code: Feeder-15-2-250

ADVANTAGES

ACCESSORIES INCLUDED

During operation of the wire‐feeding machine, its internal control board itself receives signals from the KZ-2 socket from the button on the torch and turns on the protective gas supply valve at the right time, then with a predetermined delay, it sends a signal to turn on the power supply, then turns on and stabilizes the rotation speed wire feed motor. After the end of the welding process, everything turns off in the reverse order with the necessary delays. Everything is set by default to optimal settings. The device is most optimized for working with PATON™ sources and will require a minimum of time for the user to adapt, since the response places for the sockets and installation are already provided for in the design.

Rated power supply voltage, 50 Hz, V	220
Rated consumed current, A	0,25
Rated welding current, A	250
Maximum welding current, A	315
Operating load factor	70%/315А 100%/250А
Power supply voltage control range, V	180-260
Amount rollers of pressure	2
Wire feed speed regulation, m/min	2,0-16,0
Welding wire diameter, mm	0,6-1,2
Wire refill function	+
Shielding gas test function	+
Arc starting voltage (V)	55
Maximum consumed power (kVA)	80
Operating temperature range	–25…+45°С
Overall dimensions (length x width x height) (mm)	430х260х270
Weight without a wire coil and accessories, kg	7,0
Maximum coil weight, kg	15

WIRE FEED UNITS