Glasurit ProClass P-U-10S (0.4L / 400ml)
Main advantage Glasurit P-U-10S– this is an uncompromising speed of minor repairs while maintaining strict German adhesion standards. In the conditions of a streaming car service, spending time diluting 50 grams of liquid primer for plastic in a spray gun for the sake of painting one parking sensor or mirror is economically unprofitable and time-consuming.
Spray P-U-10S instantly solves this problem. You receive the original premium adhesion activator of the ProClass line in a mobile format. It guarantees that the paint on the corners of the bumper or small plastic body kit will not peel off under the pressure of water at the very first wash, and the priming process itself will take the painter only a few minutes.
Glasurit ProClass P-U-10S Plastic Primer Spray is a high-tech one-component (1K) ready-to-use primer – adhesion activator in a convenient aerosol can. The product is developed as part of the premium line ProClass and is designed to create reliable molecular adhesion between automotive plastics and subsequent paint and varnish materials.
The P-U-10S spray format is ideally optimized for express repairs (Spot Repair method), painting new small parts (mirrors, door handles, parking sensors) or for priming local sanding to plastic on bumpers. The high-quality aerosol head provides a fine spray comparable to a professional spray gun.
Key advantages of the model:
-
Powerful direct adhesion to polymers: Destroys the surface barrier of smooth plastics and firmly adheres to all major types of automotive plastics (PP-EPDM, ABS, PC, PA, PUR, PVC, etc.).
-
Maximum speed and availability: Does not require mixing with hardener, thinner and subsequent washing of the spray gun. Just shake the can and the material is ready for application.
-
Extremely short drying time: The primer dries almost instantly, allowing you to proceed to the application of subsequent materials (filler primers or base enamels) within 10 minutes.
-
Thin-layer uniform application: It is applied in an even, thin layer without drips or sagging, completely preserving the original factory texture of the plastic part (if painting is done without leveling the structure).
-
High elasticity: Forms a flexible substrate that dampens the impacts of gravel and bends along with the body plastic, completely eliminating cracking and peeling of paint during use.
-
Cost-effectiveness for local work: The 400 ml volume is ideal for spot repairs. The cylinder can be used multiple times, which eliminates excess material consumption.
| Parameter | Meaning/Instruction |
| Package volume | 0.4 liter (400 ml) in aerosol can |
| Product type | 1K adhesion activator for plastics (Plastic Primer Spray) |
| Coating color | Clear (with a slight silver or matte tint to control application) |
| Number of layers | 1–2 thin layers (until a continuous film is obtained) |
| Holding/drying time | 10–15 minutes at +20°C before subsequent coating |
| Subsequent materials | 2K ProClass primers, waterborne basecoats (90 Line) |
