Glasurit 934-0 (1 литр) адгезионный грунт для пластиков
The main advantage of the soil Glasurit 934-0 – this is technological reliability and protection against the most unpleasant defect in the painting business – “floating” and peeling of paint from bumpers due to the pressure of water at car washes. This product ensures that the repair item will last as long as the factory coating, maintaining the impeccable reputation of your auto repair shop.
Glasurit 934-0 is a ready-to-use (one-component) transparent primary primer, designed specifically to ensure high adhesion of subsequent layers of paintwork to automotive plastic parts. It is a mandatory technological link when painting new or repaired plastic elements such as bumpers, mirror housings, spoilers, moldings and decorative trims.
Key advantages of the model:
-
Maximum adhesion to plastics: Creates a strong molecular bond with all common types of automotive plastics (PP-EPDM, ABS, PC, PA, PBT, PVC, etc.), completely eliminating the risk of peeling or peeling of paint during operation.
-
Ready to use (1K): The product does not require mixing with a hardener or thinner—it is enough to mix it thoroughly before pouring it into the spray gun, which saves the painter’s time and eliminates errors in proportions.
-
High elasticity: The structure of the soil is ideally adapted to the flexibility of plastic parts. The coating retains elasticity, absorbing deformation during light impacts and vibrations.
-
Fast air drying: The varnish or subsequent primer-filler can be applied after 15 minutes air drying at room temperature.
-
Economical: It is applied in one thin, neat layer, so a liter package is enough to process a large number of body parts.
| Parameter | Meaning/Instruction |
| Package volume | 1 liter |
| Color | Clear (with a slight silver/straw tint to control application) |
| Number of components | 1K (one-component, ready to apply) |
| Application technology | 1 thin, closed layer |
| Recommended spray gun | Compliant / HVLP (nozzle 1.2 – 1.4 mm, inlet pressure 2 bar) |
| Dry coating thickness | 5 – 10 microns (do not allow overflow and thick layers!) |
| Holding/drying time | 15 minutes at 20°C before subsequent coating |
| Subsequent coatings | Two-component primers-fillers Glasurit or finishing varnishes (with the obligatory addition of a plasticizer, where applicable) |
