PSI-160S DC MIG/MAG/MMA/TIG PSI-160S DC MIG/MAG/MMA/TIG PSI-160S DC MIG/MAG/MMA/TIG PSI-160S DC MIG/MAG/MMA/TIG PSI-160S DC MIG/MAG/MMA/TIG PSI-160S DC MIG/MAG/MMA/TIG PSI-160S DC MIG/MAG/MMA/TIG

PSI-160S DC MIG/MAG/MMA/TIG

Code: PATON™ StandardMIG-160

ADVANTAGES

  • Hot Start

ACCESSORIES INCLUDED

  • The welding unit
  • CHARACTERISTIC FEATURES AND ADVANTAGES

    • The possibility to control welding parameters in a wide range:
    1. In the ММА process: 1 basic parameter + 10 additional parameters
    2. In the TIG process: 1 basic parameter + 4 additional parameters
    3. In the MIG/MAG process : 2 basic parameters + 4 additional parameters
    • The availability of the adjustable pulse welding mode for all the welding processes.
    • The microelectronic elements of the unit are installed in a special compartment.

    The parameters of the welding unit are preset as optimal for the most operation modes. The more complex adjustment is possible, if required, provided that the welder has corresponding knowledge and experience. The characteristic feature of the semi-automatic welding units of the STANDARD series is that every unit contains a high-power, reliable, and airtight welding wire feeding unit.

  • Rated power supply voltage, 50 Hz (V)

    220

    Rated consumed current (A)

    18 … 21

    Rated welding current (A)

    160

    Maximum welding current (A)

    215

    Operating load factor

    45%/160А - 100%/107A

    Power supply voltage control range (V)

    160 ... 260

    Welding current control range (A)

    8 ... 160

    Welding voltage control range (V)

    12 ... 28

    Welding wire feed speed control range (m/min)

    2.0 ... 16

    Welding wire diameter (mm)

    0.6 ... 1.0

    Weight of a wire coil, not more than (kg)

    5

    Pulse modes in welding

    MMA/TIG/MIG/MAG

    Increased-current arc starting function (Hot Start)

    Adjustable

    Reduced-voltage welding function (Arc Forcing)

    Adjustable

    Protection against electrode sticking (Antisticking)

    Automatic

    Reduction of open-circuit voltage function

    On/Off

    Open-circuit voltage in manual arc welding (V)

    12/75

    Arc starting voltage (V)

    110

    Rated consumed power (kVA)

    4.0 … 4.6

    Maximum consumed power (kVA)

    6.2

    Efficiency coefficient (%)

    90

    Cooling

    Forced

    Operating temperature range

    –25 … +45 °С

    Overall dimensions (length x width x height) (mm)

    420x245x298

    Weight without a wire coil and accessories

    11.0

    Protection class

    IP21